Per-MW pricing, regional variance, and cost drivers for owners scoping hyperscale & AI builds.
Salary benchmarks across the 14 mission-critical disciplines.
NQA-1 is not a personal certification. For SMR construction jobs in 2026, candidates need role-specific training, supervised work, and documented employer qualification - not just a course certificate. Start by checking the project’s required NQA-1 edition and the duties the employer permits.
NQA-1 Part I sets out 18 QA requirements, covering work controls, supplier checks, inspections, records, and audits. Three career paths put those requirements into practice:
The hiring goal is simple: show what training was completed, what work was performed under supervision, and which duties were formally approved. Organizational certification, course completion, and individual qualification serve different purposes - and none replaces the project’s licensing, contract, or QA requirements.
Controls depend on safety significance - not every SMR task needs the same controls. The approved QA program sets requirements for procurement, supplier oversight, inspection, verification, and documentation based on safety classification, function, and project commitments.
The approved QA program and project documents must define the graded approach. Field personnel can’t apply it informally. Employers use these requirements to assess whether candidates can control field quality, supplier documentation, and turnover records.
ASME NQA-1 Part I contains 18 requirements. Use this checklist to connect each requirement to the records that show compliance.[6]
Approved procedures and inspection-and-test plans turn these requirements into field steps that can be checked. Before work starts, use the approved procedure and confirm the hold points and acceptance criteria.
Pay close attention to supplier controls, breaks in traceability, and incomplete turnover packages. These are key risk areas during execution.
Supplier oversight starts before award. Evaluate the supplier’s capability, QA program, qualifications, audits, and corrective actions. Procurement specifications must pass applicable requirements to lower-tier suppliers. Use audits, source inspections, surveillance, receiving inspections, and record reviews as required. Where commercial-grade dedication applies, identify critical characteristics and document acceptance methods that demonstrate the intended safety function.[7][9]
Build turnover packages as work proceeds - not after it ends. Include procedures, drawings, inspection and test plans, certifications, test records, audit reports, nonconformance dispositions, corrective actions, and as-built information. Before acceptance, check the package against procurement and QA requirements. Electronic records need access control, version control, backups, audit trails, metadata, and retention rules.[10][11]
Appendix B is a regulation; NQA-1 is a consensus standard. Where applicable, 10 CFR Part 50, Appendix B establishes QA criteria for activities affecting safety-related structures, systems, and components. Applicable 10 CFR Part 21 provisions address the evaluation and reporting of certain defects and failures to comply. They do not replace a QA program.[12]
Licensing commitments, design bases, engineering specifications, codes, and contracts set additional obligations, including the governing NQA-1 edition. Build a matrix that links each obligation to its activity, owner, evidence, and retention rule.[13] These obligations define the work employers assign to QA managers, quality engineers, and lead auditors.
NQA-1 defines the controls; employers decide who is qualified to carry them out. In SMR construction, hiring usually follows three tracks: QA management, field verification, and independent auditing. Together, these roles oversee supplier quality, field checks, and turnover records.
The QA manager maintains the program. Written authority spells out who can hold work, approve corrective actions, release turnover items, and resolve decisions across the owner, designer, constructor, and fabricators.
Supplier oversight means evaluating performance, coordinating inspections, and escalating unresolved deficiencies. Controlled procedures, qualification records, audit reports, and corrective-action trends show how the program is being carried out and keep management informed.
Quality engineers turn drawings and procurement requirements into field checks, traceability, and turnover-ready records. They check concrete, steel, welding, and mechanical and electrical installations against acceptance criteria and installation controls. They also connect material certifications to installed items.
For hiring, show that you can interpret specifications, close documentation gaps, and verify traceability.
Lead auditors stay independent of the activities they audit. They define scope and sampling, interview personnel, and examine records. Strong candidates separate facts from opinion and write findings that link a requirement to a documented condition.
Closing an action takes more than a promise to fix it. Auditors must verify that the corrective action was implemented and that it worked.
ASME qualification benchmarks typically require at least five QA audits within three years, including one nuclear QA audit in the prior year, plus training, examinations, supervised participation, and documented proficiency.[16]
NQA-1 Career Path: Training to Documented Qualification
Once you understand the roles, connect your background to the work employers need. Match your construction, manufacturing, or audit experience to your target nuclear QA duties: inspection, document control, supplier oversight, design interface, or auditing.
Relevant degrees include engineering, construction management, quality, and related technical fields. Employers may also consider apprenticeships, technical certificates, trade credentials, equivalent experience, and military quality or maintenance experience. Each employer qualifies candidates against the assigned duties and procedures.[12][8][13]
That match shapes which procedures, records, and supervised tasks you train on first. Employers use these paths to staff roles that protect supplier quality, field verification, and turnover accuracy.
Start by documenting your experience. Then take role-specific training on the governing NQA-1 edition and Appendix B. Look for courses that state the NQA-1 edition, course length, assessment method, and Part I coverage.
Classroom work is only part of the process. Before taking independent assignments, complete supervised work in procurement reviews, inspections, records control, corrective action, or auditing. You’ll also need the employer’s required procedure training, examinations, and task evaluations.[8][14]
Keep a qualification file with your training records, assigned tasks, supervisor evaluations, examination results, and qualification scope. If you’re working toward a lead auditor role, also log audit dates, criteria, responsibilities, participation, and proficiency reviews. Check the governing employer procedure for experience and requalification requirements - don’t assume the same audit-count rule applies everywhere.[16][18][19]
When applying, organize your experience the way employers review qualifications. On your resume, clearly separate completed training, supervised work, and documented role qualification. Include the course name, provider, NQA-1 edition, completion date, assessment method, supervised tasks, and qualification scope for employer review.[8]
Employers should check job fit for SMR QA work with a role qualification matrix covering experience, examinations, permitted duties, supervision, and requalification.[8][17] Use iRecruit.co to match your documented experience to role requirements and spot gaps in training or supervised practice.
For SMR QA hiring in 2026, employers need documented role qualification - not just course completion. Lead auditor authority also requires verified qualification and continued proficiency.[4][5][15]
This distinction matters most when QA decisions affect fieldwork, supplier acceptance, and turnover records. Job readiness means checking hold points, maintaining traceability, producing sound records, and controlling nonconformances - all within clearly defined authority limits.[13][20]
These controls also shape project risk and support safer execution. Delivery still depends on design maturity, procurement, staffing, contractor performance, and construction execution.
Candidates should identify their remaining qualification gaps and the supervised work needed to close them. Employers should base hiring on documented authority, not assumed experience.
Yes, your NQA-1 qualifications can transfer. But employers typically want documented experience tied to the role, not just proof that you completed a course.
Be ready to show that you’ve put NQA-1 processes into practice, verified them, and taken responsibility for the documentation. That includes supplier qualification, corrective action, and records management. Lead auditors should also show that they’ve led and documented audits.
Without nuclear-specific evidence, you may need onboarding, training, and supervised qualification before you can work independently. [1][2][3]
Complete ASME NQA-1 awareness training and get familiar with NRC Part 50/52 regulations and ASME Section III standards. This helps you connect your industrial experience to nuclear quality assurance (QA) expectations.
Look for regulated or mission-critical assignments in your current role. On your resume, emphasize procedural discipline, thorough documentation, and nonconformance management. Employers often provide nuclear-specific training after hiring for technical and craft roles.
Confirm whether the employer requires hands-on NQA-1 experience, rather than awareness or coursework alone [1]. Choose a course that matches the employer’s specified code edition, QA program requirements, and role qualification matrix [2][3].
Check the required experience with procedures, record control, supplier qualification and auditing, nonconformance and corrective-action tracking, and audit readiness. Look for objective evidence, such as turnover packages, inspection/test records, and traceable material certificates. Training alone may not meet the requirements [1].